| Regular
checking of moisture content during the drying out period
of a new concrete floor or floor screed is important to
ensure it has reached sufficient dryness to accept the
floor covering. Excess moisture in the concrete could
cause latent problems such as condensation or failure
of the adhesive under the floor covering. |
|  TRAMEX
CONCRETE ENCOUNTER MOISTURE METER
The Concrete
Encounter is a hand-held electronic moisture meter utilizes
non-destructive impedance measurement for moisture determination.
Parallel co-planer electrodes are mounted on the unit's
base which transmit low-frequency signals into the concrete
or cement floor to a depth of approx. 1/2 inch (12.5
mm). The results give the average moisture content to
a depth of approximately 4 inches (100 mm) during the
drying period.While concrete under normal conditions
can never be completely dry, the instrument has been
calibrated on acceptably dry material.
|
 |
 SAND
AND GRAVEL MICROWAVE MOISTURE METER
A microwave-technology based moisture meter for fast moisture
content testing in sand and other fine and coarse aggregates.
The Trident
T-T-90 moisture meter utilizes the latest microwave and
microprocessor technology to measure moisture content
in various fine and coarse-grained materials. The prongs
of the probe are inserted into the material to be tested
and moisture content is instantaneously shown in the digital
display. |
|
 CONCRETE
ANALOG MOISTURE METER - WAGNER
The Wagner Moisture Meter provides a quick, initial indication
of the moisture condition of concrete. You can determine
if there’s no moisture evident, as well as pinpoint areas
for possible further testing, if needed. Utilizing advanced
RF technology, pin penetration is not needed, making your
job much easier.
|
|
 Concrete
/ Humidity Measurement Probe System Kit HM44
The Vaisala HUMICAP® Structural Humidity Measurement Kit
HM44 provides a reliable and accurate method of measuring
the drying out of construction materials. |
|
 Delmhorst ACCUSCAN Pin-less, Analog Moisture
Meter
Delmhorst’s superior quality and service have made their
pin-type meters the most respected in the industry. Now,
that same level of performance is available in the convenience
of a pinless moisture meter. Use on wood, concrete, drywall
and other building materials to pinpoint moisture up to
3/4" in depth. The easy-to-read analog readout displays
percent moisture content in wood, and has a color-coded
reference scale on non-wood materials. Affordably priced
for a pinless meter, it can be invaluable to many tradesmen-home
inspectors, contractors, pest control operators, EIFS
inspectors, flooring installers, water restoration professionals
and many more. |
|
.jpe) Delmhorst BD-2100 Digital Moisture Meter
Digital
display with separate scales for wood, plaster/concrete,
and gypsum. Measures wood moisture content over the range
of 6-40%. Reference scale provides relative moisture readings
in non-wood materials. Averages up to 50 accumulated readings.
Adjustable, audible set point alerts you when a pre-selected
% moisture content has been reached. Green, yellow and
red LEDs provide at a glance indication of moisture conditions.
One of the industry favorites for testing EIFS (Exterior
Insulated Finish System). |
|
.jpe) Mini Ligno Super Moisture Meter
This compact
rugged instrument is one of the most popular moisture
meters used in the construction trades. Ideal for checking
the dryness of lumber, veneer or fiberboard, in a shop,
at home or in any industrial application. |
|
The
Moisture Meter Store
30 Oser Avenue
Suite 500
Hauppauge, NY 11788
Toll Free Fax: 1-800-334-9291
International: 1-631-348-3759 |
